{{ 'fb_in_app_browser_popup.desc' | translate }} {{ 'fb_in_app_browser_popup.copy_link' | translate }}

{{ 'in_app_browser_popup.desc' | translate }}

戒圍測量



戒圍內徑周長測量

測量步驟

1. 剪一張寬大約1公分,長約10公分以內的紙或是任何較沒彈性的線(鐵絲、棉線等)。

2. 繞住欲測量的那隻手指根部一整圈做個記號,最剛好的戒圍尺寸應該要在戴著時
不會掉出你的手指,並可以被你的關節稍稍卡住。

3. 測量那一圈的長度就是你的“戒圍內徑周長”。

*不要拿厚度超過1毫米(mm)的紙或線測量,因為測量用具的厚度也會影響到結果。

*每個人的戒圍尺寸會因為溫度冷熱與一天的時間所改變,例如在天氣冷或是晚上時測量手指的尺寸就會比較小;
因此建議大家最好在三到四種不同的情況下測量,這樣便能精準地知道自己的戒圍尺寸。


*如果有現成的戒指直接量內圍直徑提供給我們會最精確

為了讓大家更方便清楚知道自己的戒圍,我們製作了CYH的戒圍卡。
卡片本身已經幫各位把每個戒圍挖空,收到卡片後直接使用測量即可!




《戒圍卡使用方法》

  •  將戒圍卡套入欲量測的手指根部,套上去要感覺緊緊的,不會掉下來,那就是你的戒圍囉!
注意!:合適戒圍尺寸應該是能夠完全卡住手指根部,若戒圍卡能夠輕易拿下來的話就代表這個戒圍太大了,如果尺寸是在兩個數字之間,那就選擇中間的尺寸。
Ex: 套入 #12覺得有點鬆,#10又太緊,那麼這隻手指的戒圍就是 #11

有任何問題歡迎隨時詢問!


Measuring your Finger

STEPS:

1. Get a paper about 10 cm long and 1 cm wide or a non-stretchy string.

2. Wrap around the base of your finger and make the mark on the paper/string.
Remember, the circle has to be snug enough so it will not fall, 
but also loose enough to slide over your knuckle.

3. Measure the length of the circle and that will be the inner circumference of your ring size.

* Do not use the paper/ string thicker than 1mm, 
otherwise, it could affect the precision of the result.

* Your finger size does change depends on whether the temperature is cold/warm, 
or the time when you measure it. 
For example, your finger size gets smaller when it is cold or it is at the end of the day. 
Therefore the best way to measure your finger size is
to measure at least 3 times at different conditions to have an accurate ring size. 




chingyihuang_jewelry 

Email: chingyihuang23@gmail.com